SCR power regulator
Products

Remote Access Temperature Control System

IoT is getting more and more popular, to keep up with the trend, for some of temperature control system with PLC in it, we offer an alternative solution by using our DIN rail temperature controller plus our IoT box, or IoT HMI, the concept is implementing DIN rail temperature controller system and connect it with IoT HMI plus various I/O modulars, so that the PLC can be eliminated from the system, 

  • Item no.:

    RA-Maxwell001
  • Min order:

    1 PCS
  • Product weight:

    200g

Temperature control system with remote access and configuration feature

-Key features

● The system will be built by using our DIN rail temperature controller and DIN rail mount or panel mount HMI
● The system is fully customized according to customer's specific requirements, for example, if you have 16 temperature control points in your system, then we will use 4 PCS of 4 channel DIN rail mount temperature controller
● There are also a lot of other objects to be controlled in some of the temperature control system, objects like pumps, fans etc, in this case, we have various I/O modulars, like NPN/PNP input/output, Relay output modular, current measurement modulars etc.
● Remote access from PC, Cell phone available, the display on the local HMI can be sync to PC or cellphone(works on both android and IOS cell phone)
● All the DIN rail mount units can be racked together via the quick connector, makes the wiring on site super easy.
● Temperature system with data logging function,
● We can remotely upgrade the software or firmware from China for the system outside of China
● The concept is to eliminate the PLC from the system, PID controller is a better solution for general temperature control task.


Temperature control system with remote access and configuration feature
Below is a video tutorial on the remote access system, They are two units in the system, one of them is FT20X LCD display PID panel mount temperature controller, the other one is our DR04C DIN rail mount temperature controller, plus a 4.3'' IoT HMI

 

Related products
SCR power regulator and temperature controller

KDF100

SCR Power controller with temperature controller
This is a single phase SCR power regulators and temperature controllers 2 in 1 units, in a typical heating system, you would need a temperature controller and a SCR power regulators, and they are two separate devices, we go further and build this two devices in one package, this saves a lot of efforts for panel builders when it comes down to wiring, and RS-485 modbus is a standard feature, controller can be integrated to systems with HMI or PLC etc. the load can be directed wired to this thyristor power regulators, and it works with all kinds of inputs, Thermocuple, RTD, analog signal
view more
RS-485 Relay output module

DR04E

4 inputs 4 relay output I/O module
Maxwell DR04E is a din rail mount 4 input 4 relay outputs I/O modules, input can be dry contact or NPN input, 4 relay output can be controlled from master device like HMI or PLC, the input work independently apart from output, or the input can be programmed to work correlated with the output. 8 channel of timer incorporated.
view more
Din rail mount temperature controller

DR04C

Two Channel 4 Output DIN Rail Mount Temperature Controller
Maxwell DR04C is a din rail mount PID temperature controller, 2 channel configuraitons, works with TC/RTD inputs, and output can be Relay, SSR Drive, or analog like 4-20mA, 0-10VDC, 2 auxiliary outputs can be assigned as the alarm output for any of the channel, or it can also be configured as the cooling output, in some particular application, the auxiliary output can also be programmed as an event output which is controlled by a master device via RS-485 communication, the RS-485 is a standard features. 24VDC source to sure greater saftey.
view more
Rail mount PID controller

DR04D

Four Channel 4 Output DIN Rail Mount Temperature Controller
Maxwell DR04D is a din rail mount PID temperature controller, 4 channel configuraitons, support thermocouple inputs(K,E,J,N,W,S,T,R,B), and output can be Relay, SSR Drive, or analog like 4-20mA, 0-10VDC, PID or ON/OFF control mode, RS-485 modbus communication as standard features, 24VDC source for greater saftey, auto/manual control switchable, when you have a sensor failure, the system can be quickly switched to manual control mode to maintain the temperature, soft-start and run/stop features.
view more
Two Channel dual loop PID controller

DR02B

Two Channel dual loop Din rail temperature controller
Maxwell DR02B is a din rail mount PID temperature controller, 2 channel configuraitons, support thermocouple inputs(K,E,J,N,W,S,T,R,B), and output can be Relay, SSR Drive, it's a very simple din rail mount ccontroller, PID or ON/OFF control mode, RS-485 modbus communication as standard features, 85~265Vac source for easy system intergration, auto-tuning for both loops and with an external plug and play external configruation devices. the field configuration will be very easy to carry out.
view more
Transistor output module

DR8F-T

8 inputs 8 NPN transistor output I/O module
Maxwell DR8F-T-U06 is a din rail mount 8 input 8 transistor outputs I/O modules, input can be NPN or PNP input, 8 NPN transistor output can be controlled from master device like HMI or PLC, the input work independently apart from output.
view more
True RMS ammeter

DR04HAC-710

8 channel AC true RMS ammeter
•8 channel AC current true RMS ammeter•Din Rail mount, Can be used in temperature control system with to detect the True RMS current value•24VDC source•Maximum 400A measurement range
view more
Touch screen ramp and soak controller

MF43HYC

Cell Phone and PC access Ramp and Soak Controller
MF43HYC is a touch screen ramp and soak controller, accessible from PC and cell phone, works with both android and IOS system, built-in datalogging features, and data can be downloaded to PC, this item is perfect control solution for Experimental furnace, ceramic kiln, porcelain oven, Pottery oven, jewelry casting oven etc, the conventional ramp and soak controllers or some call it profile controllers on the markets are configured via set buttons on the front panel. end user have to go through layers upon layers of parmaeters and navigate through different parameter during the configuration process. the process could be painful and stressed and often times lead to less efficient and frustration. 
view more

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp