● MW-DT-50
● Size:50mm*100mm*96mm
● Heatsink for 60A SSR
● Panel mount and Din rail mount with clamps
● Aluminum heatsink
● For single phase SSR

DIN rail clamps for heatsinks and solid state relays, some of heatsinks can't be mounted to standard din rail, but the heatsink can be attached to this din rail clamps, and then mounted to a DIN rail.

Heatsinks for 3 phase SSR, compatible with 10A/25A solid state relay, it's a radiator to help the SSR cool down while operating.

● Cooling fans
● 12cm*12cm or 8cm*8cm
● Sleeve bearing fans
● 220Vac or 110Vac

● Three phase SCR power regulator
● Universal input, supports all analog input
● 24~440Vac load, cost effective
● From 25 amps to 200 amps
● Ideal for resistive load
● MS-3VD3825C,MS-3VD3840C,MS-3VD3860C
● MS-3VD3880C,MS-3VD38100C,MS-3VD38120C

SCR-51 series is a compact design cost effective three phase SCR power regulator, works perfectly for resistive load. With built-in heatsink and cooling fans.  Makes it very easy to use. Load option starts from 40 amps all the way up to 100 amps,  with a built-in overheat thermo protection to make your system always protected. Clear digital display for temperature and input/output indication.

- Three phase SCR power regulator
- 0-10V,4-20mA,0-5V,potentiometer input
- 24~480Vac load
- 40amps,60amps,75amps,100amps
- Digital LED display
- Ideal for resistive application

● Three phase SCR power regulator
● Universal input, supports all analog input
● 24~480Vac load
● 40amps,60amps,75amps optional
● Digital LED display
● Ideal for resistive application

Three-Phase Intelligent SCR Power Regulator

● Incremental rotary encoder
● 25mm housing diameter
● 4mm solid shaft
● Maximum 1200 PPR
● Push-pull, NPN,PNP, Line driver, voltage output
● Cable rear entry, cable length customizable

● Screw-in nozzle thermocouple type
● M6,M8, ¼ BSP, 1/4NPT etc
● Stainless steel ,silicon wire, Teflon wire etc
● Available with grounded and ungrounded configuration
● 304,316,310 Stainless steel, brass and Alumimun
● High temperature-resistant compensating cable, PVC cable, Silicone cable, PTFE cable, metal braiding cable with mica- fiber, metal braiding cable with glass-fiber.

The TC-K1 / TC-J1 / TC-T1 Series Screw-In Nozzle Thermocouple is a compact, robust, and highly versatile temperature sensing solution engineered for direct installation into threaded ports on machinery, pipelines, and process equipment. By leveraging the well-established Seebeck effect — in which two dissimilar metal conductors joined at one end generate a measurable electromotive force (EMF) proportional to the temperature difference between the hot junction and the cold (reference) junction — this sensor delivers reliable, real-time temperature readings across a broad operating range.

Designed for demanding industrial environments, the TC-K1 / TC-J1 / TC-T1 series features a fully threaded stainless steel body that enables secure, leak-proof installation into standard metric (M6, M8) and pipe-thread (1/4 NPT, 1/4 BSP) fittings. The sensor is available in three internationally recognised thermocouple calibrations — Type K (Chromel/Alumel), Type J (Iron/Constantan), and Type T (Copper/Constantan) — to suit a wide spectrum of temperature measurement requirements. Lead wire material, length, and junction type are all fully customisable, making this series an ideal choice for OEM integrators and system designers seeking a drop-in thermal sensing component.

Maxwell introduces the high-performance TC-K7 and TC-J7 Series Bayonet Thermocouples, engineered for precise and secure temperature measurement in demanding industrial environments. These sensors feature a robust threaded spring-loaded bayonet cap for constant contact pressure and easy installation, making them ideal for applications requiring frequent sensor removal and reinstallation. Available in both Type K and Type J configurations with fully customizable options including probe diameter, length, lead wire material, and junction type, our TC-K7 / TC-J7 Series delivers accurate and consistent temperature readings for critical process control across plastics, packaging, chemical, and food processing industries.

The TC-K8 is a high-performance K-type thermocouple temperature sensor engineered for accuracy and durability in demanding high-temperature environments. Its defining feature is a robust ceramic sheath that provides exceptional resistance to thermal shock, chemical corrosion, and oxidation at elevated temperatures — making it the preferred choice for industrial processes such as kiln firing, furnace monitoring, and heat treatment operations.

The sensor consists of two distinct probe sections: a stainless steel section that connects to the connection box, and a ceramic section that extends into the high-temperature measurement zone. This dual-material construction combines the mechanical strength and machinability of stainless steel with the superior thermal stability and chemical inertness of advanced ceramic materials.

The integrated die-cast aluminum connection box provides a secure, weatherproof enclosure for the thermocouple terminals, protecting electrical connections from moisture, dust, and mechanical interference. Both the probe diameter and probe length of each section are fully customizable, enabling precise adaptation to virtually any industrial installation geometry. As part of the PIDMaxWell range of temperature measurement solutions, the TC-K8 is designed to integrate seamlessly with PID temperature controllers, temperature transmitters, and data acquisition systems.