Field mount temperature transmitter with local display

TT-210 and TT-500 is 0-10V 4-20mA hockey puck head mounted Temperature transmitter, it accepts all kinds of thermocouple and RTD inputs and coverted them into an analog signal such as 4-20mA and 0-10Vdc, this head mount temperature transmitter is a two wire loop powered transmitter, which can be mounted to temperature sensor junction box. the input is configurable via PC and android cell phone. Configurable via cell phone is a great features to have as everybody carries a smart phone nowdays, which means the configuration can be conducted almost anytime anywhere

TT-216 is an input and output galvanically isolated head mounted temperature transmitter, similar to other models we have, this model works with all thermocouple and RTD inputs, but to make sure your site are on the safe side, the isolation is incorporated in this transmitter, the input and range are also programmable via our computer and cell phone software.the input is configurable via PC and android cell phone.

HART® is a worldwide known protocol which has been proven to be reliable and robust, TT-217 equipped with HART 7, put the electrical isolation between input and output and source, the configuration can be done via our free windows software, a HART to USB modem will be needed if you want to configure the temperature transmitter via PC, another option is to configure the unit by using various Hart field communicator.

● Maxwell temperature transmitter,TT-200● Universal input● 4-20mA output● Cost effective, non-isolated● Round type head mount● Input and range configurable

- head mount Modbus RS-485 temperature transmitter- TC/RTD inputs- 12-35V DC source- Modbus RTD RS-485 communication- Electrical isolation between input/output and source- PA66 housing  

● Three phase solid state relay● 3-32Vdc input● 24~480Vac load● From 10 amps up to 200 amps● Zero-crossing trigger

● MW-E-52● Size:52mm*74mm*40mm● Heatsink for 40A SSR● Panel mount and Din rail mount with clamps● Aluminum heatsink● For single phase SSR

Maxwell DR04C is a din rail mount PID temperature controller, 2 channel configuraitons, works with TC/RTD inputs, and output can be Relay, SSR Drive, or analog like 4-20mA, 0-10VDC, 2 auxiliary outputs can be assigned as the alarm output for any of the channel, or it can also be configured as the cooling output, in some particular application, the auxiliary output can also be programmed as an event output which is controlled by a master device via RS-485 communication, the RS-485 is a standard features. 24VDC source to sure greater saftey.