Maxwell MTC-V is VMD(valve motor drive) output temperature controller, incorporates 3-point stepping valve control feature, two relays, one control the open of the valve, one control the close of the valve, valve position indication, auto/manual control bumpless transfer, works with thermocouple, RTD, and analog inputs,

FTX00-610 is a PID temperature controller with built-in timer, works with thermocuple and RTD inputs, relay output for timer, it's ability to maintain the tempearture at preset time duration is the key features of this item, when temperature reach to SV, the timer will be triggered automatically and starts to counting, when the time duration elapsed, a relay will pull-in and generate a dry contact signal. RS-485 modbus communication is optional, 24VDC/AC souce is optional as well.

FTX00-B612 is a PID temperature controller with built-in timer, what it does is pretty straight forward, for application with time and temperature invovled, the timer will most likely to kick-in when temperature reach the setting value, for example, the setting value is SV, the process starts at the ambient temperature and temperature goes up to setting value, when temperature reach setting value, the timer start to counting down or up and hold the temperature at the SV for a preset time duration. this is very useful and widely being used in equipments like water bath, sterilizer, beer brewing, power oven coating machine etc. the maixmum time range 9999 minutes

Maxwell CP48T,CP72T,CP96T,CP49T is a 2 in1 temperature controller with timer, time and temperature are two variables that often involved in a heating relateble applications, a typical application such as heat press printing, food and beverage process, the timer and controller are actually two devices and built-in one

MTC-P ramp and soak PID profile multile steps controller is a advanced temperature controller, the process value changed based on predetermined ramping rate and soak rate. process value changes based on a curve over time, the output can be Relay to drive an AC contrator, or SSR Drive to drive an external solid state relay, or 4-20mA analog outputs, maximum 4 patterns with each pattern at maximum 8 segments, 4 pattern can be linked together as 1 program with 32 segements. this controller is suitable for application like muffle furnace, high temperature furnace, klin control etc.

MF43H is a touch screen ramp and soak controller, the conventional ramp and soak controllers or some call it profile controllers on the markets are configured via set buttons on the front panel. end user have to go through layers upon layers of parmaeters and navigate through different parameter during the configuration process. the process could be painful and stressed and often times lead to less efficient and frustration. the configuration with our touch screen ramp and soak controller is much more easier, it's easier for end user to pick up the process as they operate the controller like a cell phone. below are some of the basic features with this touch screen ramp and soak profile controller