Multi Input Three Phase SCR Power Regulator

- Three phase SCR power regulator- 0-10V,4-20mA,0-5V,potentiometer input- 24~480Vac load- 40amps,60amps,75amps,100amps- Digital LED display- Ideal for resistive application

● Three phase SCR power regulator● Universal input, supports all analog input● 24~480Vac load● 40amps,60amps,75amps optional● Digital LED display● Ideal for resistive application

Three-Phase Intelligent SCR Power Regulator The Maxwell TC-200S Series is an industrial-grade, three-phase intelligent SCR (Silicon Controlled Rectifier) power regulator designed for precise, stepless control of resistive heating loads in demanding industrial environments. Manufactured by Maxwell Automation Technology Co., Ltd. under the PIDMaxWell brand, the TC-200S combines a fully digital control architecture with an integrated dual-row LED display, multi-function indicator LEDs, and a front-panel keypad, enabling operators to monitor process parameters and adjust output settings directly without external programming tools. The regulator accepts a wide range of analogue control input signals — including 4–20 mA, 0–20 mA, 0–5 VDC, 0–10 VDC, 1–5 VDC, and 2–10 VDC — and features automatic phase detection, making it straightforward to integrate into new or existing control systems. An integrated soft-start (ramp) function eliminates inrush current surges at power-on, protecting both the SCR modules and the connected heating elements from thermal shock. When the heat-sink temperature exceeds the user-defined alarm threshold (AL1), the unit automatically reduces output power to a configurable safe level (EOP), maintaining process continuity while safeguarding the internal SCR modules from thermal damage. An optional RS-485 communication interface with Modbus-RTU protocol enables seamless integration into SCADA systems, PLCs, DCS, and industrial IoT networks. The TC-200S supports auto/manual bumpless transfer, run/stop control, and configurable minimum and maximum output limits, providing the flexibility required for a wide range of industrial heating and process control applications. Rated current options of 100 A, 125 A, 150 A, 175 A, 200 A, and 225 A cover load capacities from 48 kW to 190 kW (three-phase), making the TC-200S suitable for small laboratory ovens through to large industrial electric furnaces.

SCR-51 series is a compact design cost effective three phase SCR power regulator, works perfectly for resistive load. With built-in heatsink and cooling fans.  Makes it very easy to use. Load option starts from 40 amps all the way up to 100 amps,  with a built-in overheat thermo protection to make your system always protected. Clear digital display for temperature and input/output indication.

Simple but accurate 3 digits display, for application less than 1000 degree C or F, Thermocouple and RTD input to accommodate most of applications, touch button which do not wear out over time, perfect for demanding situation, advanced control algorithm to achieve perfect control accuracy with limited overshoot and undershoot, 3 years warranty, relay and SSR Drive output on the same device, large and high visibility LED display, two options on the display, white+green or red +yellow, Simple and easy to use is the concept of this controller, very limited parameters to reduce the workload on configuration. CE and ROHS compliant.

MTC-P ramp and soak PID profile multile steps controller is a advanced temperature controller, the process value changed based on predetermined ramping rate and soak rate. process value changes based on a curve over time, the output can be Relay to drive an AC contrator, or SSR Drive to drive an external solid state relay, or 4-20mA analog outputs, maximum 4 patterns with each pattern at maximum 8 segments, 4 pattern can be linked together as 1 program with 32 segements. this controller is suitable for application like muffle furnace, high temperature furnace, klin control etc.

Maxwell DR02B is a din rail mount PID temperature controller, 2 channel configuraitons, support thermocouple inputs(K,E,J,N,W,S,T,R,B), and output can be Relay, SSR Drive, it's a very simple din rail mount ccontroller, PID or ON/OFF control mode, RS-485 modbus communication as standard features, 85~265Vac source for easy system intergration, auto-tuning for both loops and with an external plug and play external configruation devices. the field configuration will be very easy to carry out.

● Digital programmable counter● Dual line 6 digits LCD display● Panel mount type● Dry contact, NPN input● Maximum 4 outputs(OP1 and OP2)● 85~265Vac or 24VDC source● SV counting/Batch counting/Totalizing count