Field mount temperature transmitter with local display

● Screw-in nozzle thermocouple type● M6,M8, ¼ BSP, 1/4NPT etc● Stainless steel ,silicon wire, Teflon wire etc● Available with grounded and ungrounded configuration● 304,316,310 Stainless steel, brass and Alumimun● High temperature-resistant compensating cable, PVC cable, Silicone cable, PTFE cable, metal braiding cable with mica- fiber, metal braiding cable with glass-fiber.

● MW-T-80● Size 80mm*80mm*70mm● Heatsink for 80A/100A/120A SSR● Panel mount and Din rail mount● Aluminum heatsink● For single phase SSR

FL-SSR is a DIN rail mount solid state relay , DC input AC load version, heatsink integrated with SSR, available with 10A, 25A, 40A, 55A.

Maxwell MTC-V is VMD(valve motor drive) output temperature controller, incorporates 3-point stepping valve control feature, two relays, one control the open of the valve, one control the close of the valve, valve position indication, auto/manual control bumpless transfer, works with thermocouple, RTD, and analog inputs,

FTX00-B612 is a PID temperature controller with built-in timer, what it does is pretty straight forward, for application with time and temperature invovled, the timer will most likely to kick-in when temperature reach the setting value, for example, the setting value is SV, the process starts at the ambient temperature and temperature goes up to setting value, when temperature reach setting value, the timer start to counting down or up and hold the temperature at the SV for a preset time duration. this is very useful and widely being used in equipments like water bath, sterilizer, beer brewing, power oven coating machine etc. the maixmum time range 9999 minutes

FT100-601/602 is a process indicator which accepts thermocouple, RTD and analog signals, the standard version works with TC/RTD inputs, and specify the analog inputs if the input is analog like 0-10VDC, 4-20mA etc, the display can be either in Celcius or Fahrenheit, maximum 3 alarms can be selected for large sizes, 24VDC auxiliary power supply is possible to power transduers like presure transmitters, process value can also be re-transmitted to feed to PLC or paperless recorders, RS-485 modbus communication available to be abled to connected with PLC and HMI

● Screw-in nozzle thermocouple type● M6,M8, ¼ BSP, 1/4NPT etc● Stainless steel ,silicon wire, Teflon wire etc● Available with grounded and ungrounded configuration● 304,316,310 Stainless steel, brass and Alumimun● High temperature-resistant compensating cable, PVC cable, Silicone cable, PTFE cable, metal braiding cable with mica- fiber, metal braiding cable with glass-fiber.

- Single phase solid state relay- DC input AC load- 3-32VDC input- 24~480Vac load- From 10 amps up to 200 amps- Zero-crossing trigger