AC Input AC Load 3 Phase SSR(MS-3AA48)

● Three phase solid state relay● 5-32Vdc input● 24~480Vac load● only available with 10/25/40 amps● Zero-crossing trigger● For resistive load only

● Three phase solid state relay● 3-32Vdc input● 24~480Vac load● From 10 amps up to 200 amps● Zero-crossing trigger

This thermal controller offers some basic features with limited configuration options, it is for much less demanding application, despite it's cost-effective nature, still it offers Relay, SSR Drive and analog output, analog output being at the same price with the relay and SSR Drive output, maximum 2 alarms and heating+cooling control at the same time are possible, the alarm output can be used as a sub output to control a fan or valve in a system, TC/RTD and analog inputs compatible, 24VDC source and 85~265Vac source optional

● Dual channel solid state relay● Single phase● DC 4-32V input● 24~480Vac load● 20/25/40/50/60 options on the amps● Zero-crossing trigger/Random trigger

- Single phase solid state relay- DC input AC load- 3-32VDC input- 24~480Vac load- From 10 amps up to 200 amps- Zero-crossing trigger

MF43H is a touch screen ramp and soak controller, the conventional ramp and soak controllers or some call it profile controllers on the markets are configured via set buttons on the front panel. end user have to go through layers upon layers of parmaeters and navigate through different parameter during the configuration process. the process could be painful and stressed and often times lead to less efficient and frustration. the configuration with our touch screen ramp and soak controller is much more easier, it's easier for end user to pick up the process as they operate the controller like a cell phone. below are some of the basic features with this touch screen ramp and soak profile controller

Maxwell DR04C is a din rail mount PID temperature controller, 2 channel configuraitons, works with TC/RTD inputs, and output can be Relay, SSR Drive, or analog like 4-20mA, 0-10VDC, 2 auxiliary outputs can be assigned as the alarm output for any of the channel, or it can also be configured as the cooling output, in some particular application, the auxiliary output can also be programmed as an event output which is controlled by a master device via RS-485 communication, the RS-485 is a standard features. 24VDC source to sure greater saftey.

● Screw-in nozzle thermocouple type● M6,M8, ¼ BSP, 1/4NPT etc● Stainless steel ,silicon wire, Teflon wire etc● Available with grounded and ungrounded configuration● 304,316,310 Stainless steel, brass and Alumimun● High temperature-resistant compensating cable, PVC cable, Silicone cable, PTFE cable, metal braiding cable with mica- fiber, metal braiding cable with glass-fiber.