● Screw-in nozzle thermocouple type
● M6,M8, ¼ BSP, 1/4NPT etc
● Stainless steel ,silicon wire, Teflon wire etc
● Available with grounded and ungrounded configuration
● 304,316,310 Stainless steel, brass and Alumimun
● High temperature-resistant compensating cable, PVC cable, Silicone cable, PTFE cable, metal braiding cable with mica- fiber, metal braiding cable with glass-fiber.

● Screw-in nozzle thermocouple type
● M6,M8, ¼ BSP, 1/4NPT etc
● Stainless steel ,silicon wire, Teflon wire etc
● Available with grounded and ungrounded configuration
● 304,316,310 Stainless steel, brass and Alumimun
● High temperature-resistant compensating cable, PVC cable, Silicone cable, PTFE cable, metal braiding cable with mica- fiber, metal braiding cable with glass-fiber.

The TC-K1 / TC-J1 / TC-T1 Series Screw-In Nozzle Thermocouple is a compact, robust, and highly versatile temperature sensing solution engineered for direct installation into threaded ports on machinery, pipelines, and process equipment. By leveraging the well-established Seebeck effect — in which two dissimilar metal conductors joined at one end generate a measurable electromotive force (EMF) proportional to the temperature difference between the hot junction and the cold (reference) junction — this sensor delivers reliable, real-time temperature readings across a broad operating range.

Designed for demanding industrial environments, the TC-K1 / TC-J1 / TC-T1 series features a fully threaded stainless steel body that enables secure, leak-proof installation into standard metric (M6, M8) and pipe-thread (1/4 NPT, 1/4 BSP) fittings. The sensor is available in three internationally recognised thermocouple calibrations — Type K (Chromel/Alumel), Type J (Iron/Constantan), and Type T (Copper/Constantan) — to suit a wide spectrum of temperature measurement requirements. Lead wire material, length, and junction type are all fully customisable, making this series an ideal choice for OEM integrators and system designers seeking a drop-in thermal sensing component.

The NTC10K Series is a compact, high-precision Negative Temperature Coefficient (NTC) thermistor temperature sensor housed in a rugged stainless steel M8 screw-body probe. Designed for direct installation into threaded ports on pipework, tanks, heat exchangers, and machinery, this sensor delivers accurate, low-cost temperature measurement across a wide operating range without the need for signal conditioning or cold-junction compensation.

At the heart of the sensor is a precision NTC thermistor element with a nominal resistance of 10 kΩ at 25 °C and a B-value (B25/100) of 3950 K ± 1%. The thermistor element is encapsulated within a 4 mm diameter stainless steel probe, sealed with high-temperature epoxy resin to ensure moisture ingress protection. The M8 threaded body incorporates a high-temperature silicone gasket to provide a leak-proof seal when installed into a threaded port. A 150 mm flat silicone lead wire terminates in a standard 2-pin SMP (Micro-Fit style) connector for fast, tool-free connection to the host system.

The NTC10K series is fully compatible with Maxwell's range of temperature controllers, as well as third-party controllers, HVAC control boards, and microcontroller-based systems that accept a passive NTC thermistor input. The sensor's small probe diameter, short lead wire, and plug-and-play connector make it an ideal drop-in component for OEM equipment manufacturers and system integrators.